Xerox 7335 User Manual

104

5.

Ensure that the TCP/IP and HTTP protocols are configured on the device and are fully functional.  This 
is required to access the multifunction device's CentreWare Internet Services web pages, which can 
be used to configure Server Fax settings from a network-connected workstation.

To verify that the TCP/IP and HTTP protocols are correctly configured, print a Configuration Report as 
stated in the Configuration Report topic in the Network Connectivity section of this guide.

To configure TCP/IP, refer to the TCP/IP Configuration topic in the NOS Selection section of this 
guide.

6.

To enable HTTP, refer to the Enable Internet Services (HTTP) topic in the Network Connectivity 
section of this guide.

7.

Ensure that the FTP Client and SMB port are enabled on the device.  To verify this, print a 
Configuration Report as stated in the Configuration Report topic in the Network Connectivity section of 
this guide.

To enable SMB, refer to Enabling the SMB Setting at the Device in the Microsoft (NetBIOS over IP) 
Networks topic of this guide.  To enable FTP, use the same SMB enabling procedure, and simply 
choose FTP as the port to enable.

8.

Install and configure the Xerox-certified, third party fax server per the fax management software 
manufacturer's instructions.