Xerox 7335 User Manual
6
Internet Services (HTTP) Enablement
1.
Press the selection line labeled Port Status.
2.
Press the Change Settings button.
3.
On the Port Status screen, note which of the two buttons is highlighted as the current setting for
Internet Services Enablement. The available settings are Enabled or Disabled. In order to use
Internet Services, this setting MUST be enabled.
Internet Services Enablement. The available settings are Enabled or Disabled. In order to use
Internet Services, this setting MUST be enabled.
4.
To change settings, press your setting of choice, then press the Save button.
5.
To exit the screen, without making any changes, press the Cancel button.
Internet Services Port Number
1.
Press the selection line labeled Internet Services Port Number.
2.
Press the Change Settings button.
3.
On the Port Number screen, use the supplied keypad to enter the appropriate port number (default of
80).
80).
4.
To change settings, press the Save button.
5.
To exit the screen, without making any changes, press the Cancel button.
Exiting the Internet Services Selection Menu
To exit the Internet Services Selection Menu, which returns you to the Port Settings menu, press the
rectangular Close button in the upper right corner of the touch screen.
rectangular Close button in the upper right corner of the touch screen.
Exiting the Port Settings Menu and returning to the Device's Tools tab screen
6.
To exit the Port Settings menu, returning to the Device's Tools tab screen, press the rectangular Close
button in the upper right corner of the Port Settings menu screen.
button in the upper right corner of the Port Settings menu screen.
7.
Wait several seconds and the Auto Clear service should log you out.
Note: If you changed any settings in the Port Settings menu, the Device will automatically reboot to
register and enable your new settings.
register and enable your new settings.