Xerox 7335 User Manual

Page of 300
194
Security – Encryption
Encryption Service Overview
Note: You may have to purchase the Security Kit option to enable encryption with your Device.  If you 
cannot generate a self-signed certificate, or enable SSL/TLS Communication, as stated under 
Configuration of HTTP Communication Encryption, in this section, contact your Xerox Representative 
to purchase the option.
Types of Encryption Services Available
The communication data between the machine and computers on a network can be encrypted.
Encryption for the machine, as described in this section, is set up using Internet Services.  Internet 
Services are a series of Web (HTML) Pages located within the Device enabling network communication 
settings to be conveniently configured from a web browser running on a remotely located workstation.
For help with specific terminology as encryption is being set up on the machine, refer to the CentreWare 
Internet Services online help.
Note that the quickest and easiest, although not the most “trusted,” method to use to set up initial HTTP 
communication encryption is the generation of a self-signed certificate (as stated under Configuration of 
HTTP Communication Encryption, in this section).
Click the Machine Digital Certificate Management hot link in the Security folder on the Properties page 
of Internet Services.  Use this link to manage all the digital certificates, of various types, stored on the 
machine.
Encryption of HTTP Communications from a Client to the Machine (Server Certificate)
The SOAP port, Internet service (HTTP) port, IPP port, and WebDAV port use the HTTP server of the 
machine.
The SSL/TLS suite of protocols is used in the encryption of HTTP communications from a client to the 
machine.  A user of a client workstation accesses the machine’s HTTP server by typing https://, followed 
by the IP address of the machine, into the Address box of a web browser application.  The machine then 
offers the client a Digital Certificate, which the client accepts (after reviewing the validity of same).  Upon 
acceptance of the Digital Certificate, a Public Key exchange takes place, encryption algorithms are agreed 
upon between the two parties, and the client uses the server’s Public Key to communicate with the server 
using digitally signed and encrypted data.
Digital certificates imported from a Certificate Authority, or self-signed certificates created with CentreWare 
Internet Services, can be used as SSL/TLS certificates on the machine’s HTTP server.
Encryption of HTTP Communications from the Machine to a Remote Server (Client Certificate)
The SSL/TLS suite of protocols is used to encrypt HTTP communications with a remote server.
No client certificate is typically required for this activity. However, if a remote server is set to require an SSL 
client certificate, an SSL/TLS client certificate must be registered on the machine.
Digital certificates imported from a Certificate Authority can be used as SSL/TLS certificates on the 
machine’s HTTP server.
Note: When Remote Server Certificate Validation is enabled, under SSL/TLS Settings in Internet 
Services, the root certificate of the remote server must be registered to the machine (imported with 
Internet Services) to verify the Digital certificate of same.