Xerox 7335 User Manual
262
Configure IPP
1.
Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
Press Enter.
2.
Click the Properties tab.
3.
Click the plus (+) symbol to the left of Connectivity, then the Protocols file folder.
4.
Select IPP in the directory tree.
5.
The available selections include:
Port Number Static Display, with a default value of 631. This is the port number assigned by IANA
(Internet Assigned Numbers Authority.
(Internet Assigned Numbers Authority.
Additional Port Number entry box. You can enter port 80 (HTTP) here as a backup port.
A TBCP Filter checkbox (displayed when PostScript is enabled).
Administrator Mode checkbox. This is disabled by default. Consult the On-Line Help for use of this
feature.
feature.
DNS checkbox.
Connection Time-out entry box.
6.
Verify that the DNS checkbox is checked (enabled) by default. If enabled, the DNS Server will be
available to resolve Host Names to IP Addresses, in support of printing with IPP.
available to resolve Host Names to IP Addresses, in support of printing with IPP.
7.
Enter a Connection Time Out value for jobs being sent to the Device through this Port. This is the
length of time that the Controller will wait for an end of job command before printing the current job.
length of time that the Controller will wait for an end of job command before printing the current job.
8.
Click the Apply button to accept changes, or the Undo button to return settings to their previous
values. Note: Setting changes are not applied until you restart the Device. There is a convenient
Reboot Machine button on the Status tab of Internet Services.
values. Note: Setting changes are not applied until you restart the Device. There is a convenient
Reboot Machine button on the Status tab of Internet Services.