Manualsbrain.com
  1. Manuals
  2. Brands
  3. Xerox
  4. 7335
  5. User Manual

Xerox 7335 User Manual

Download
Page of 300
26
IPv4 IP Address
1.
Used for static IP Addressing (with "STATIC" selected as your addressing method), on the Protocol 
Settings menu, press the selection line labeled IPv4 Address.  Note that the IP Address may be 
viewed, but not changed, with dynamic addressing enabled.
2.
Press the Change Settings button.
3.
On the settings screen, use the numeric keypad to enter in the appropriate IP Address.
4.
To save settings, press the Save button.
5.
To exit the screen, without making any changes, press the Cancel button.
IPv4 Subnet Mask
1.
Used for static IP Addressing (with "STATIC" selected as your addressing method), on the Protocol 
Settings menu, press the selection line labeled IPv4 Subnet Mask.  Note that the Subnet Mask may 
be viewed, but not changed, with dynamic addressing enabled.
2.
Press the Change Settings button.
3.
On the settings screen, use the numeric keypad to enter in the appropriate Subnet Mask.
4.
To save settings, press the Save button.
5.
To exit the screen, without making any changes, press the Cancel button.
IPv4 Gateway Address
1.
Used for static IP Addressing (with "STATIC" selected as your addressing method), on the Protocol 
Settings menu, press the selection line labeled IPv4 Gateway Address.  Note that the Gateway 
address may be viewed, but not changed, with dynamic addressing enabled.
2.
Press the Change Settings button.
3.
On the settings screen, use the numeric keypad to enter in the appropriate Gateway.
4.
To save settings, press the Save button.
5.
To exit the screen, without making any changes, press the Cancel button.