Xerox 7335 User Manual

43

Port Status (EtherTalk Enablement)

1.

On the EtherTalk selection menu, press the selection line labeled Port Status.

2.

Press the Change Settings button.

3.

On the Port Status screen, note which of the two buttons is highlighted as the current setting for 
EtherTalk Enablement.  The available settings are Enabled or Disabled.  To print with EtherTalk, this 
setting must be Enabled.

4.

To change settings, press your setting of choice, then press the Save button.

5.

To exit the screen, without making any changes, press the Cancel button.

Exiting the EtherTalk Selection Menu

To exit the EtherTalk selection menu, which returns you to the Port Settings menu, press the rectangular 
Close button in the upper right corner of the touch screen.

Exiting the Port Settings Menu and returning to the Tools tab screen

1.

To exit the Port Settings menu, returning to the Tools tab screen, press the rectangular Close button in 
the upper right corner of the Port Settings menu screen.

2.

Wait several seconds for the Auto Clear service to log you out.