Acu-Rite CNC 3500i User Manual
ACU-RITE 3500i
175
7.
2
C
a
n
n
e
d
C
y
c
le
s
G-code format: G77
Field
Code
Description
SideStock
R
Amount of stock left by the roughing
passes for a finish pass on the sides only.
This amount overrides the value in S
(FinStock). A value of zero can force stock
to be left only on the bottom. Default is
equal to S (FinStock).
passes for a finish pass on the sides only.
This amount overrides the value in S
(FinStock). A value of zero can force stock
to be left only on the bottom. Default is
equal to S (FinStock).
RampFeed
J
The feedrate at which the tool will "ramp"
into the pocket in all three axes. Default is
last programmed feedrate.
into the pocket in all three axes. Default is
last programmed feedrate.
Rough Feed
I
Feedrate used during roughing passes.
Default is last programmed feedrate.
Default is last programmed feedrate.
FinFeed
K
Feedrate used during finish passes. If
entered as negative, finish pass will mill in
conventional (CW) direction. Default is last
programmed feedrate.
entered as negative, finish pass will mill in
conventional (CW) direction. Default is last
programmed feedrate.
ReturnHgt
P
Z-axis absolute start and finish height
(must be equal to or above "H"), used as a
safety/clearance Z position before making
X/Y moves. Executed in rapid at start and
end of cycle. Defaults to current Z position
at beginning of cycle.
(must be equal to or above "H"), used as a
safety/clearance Z position before making
X/Y moves. Executed in rapid at start and
end of cycle. Defaults to current Z position
at beginning of cycle.
CoarseTool
T
Number of tool used for previous roughing
cycle.
cycle.
SkipRough
E
Yes = Roughing pass is skipped, only finish
pass is performed.
No = Roughing pass is performed.
(Default)
pass is performed.
No = Roughing pass is performed.
(Default)
SkipFinish
F
Yes = Finish pass is skipped, only rough
pass is performed.
No = Finish pass is performed. (Default)
pass is performed.
No = Finish pass is performed. (Default)
FinishDir
Q
Select Cw or Ccw.