Acu-Rite CNC 3500i User Manual
ACU-RITE 3500i
179
7.
2
C
a
n
n
e
d
C
y
c
le
s
G-code format: G177
Field
Code
Description
Plunge
Feed
Feed
J
The feedrate at which the tool will "plunge"
into the pocket in the Z-axis. Default is last
programmed feedrate.
into the pocket in the Z-axis. Default is last
programmed feedrate.
FinFeed
K
Feedrate used during finish passes. Default
is last programmed feedrate.
is last programmed feedrate.
Rough
Feed
Feed
I
Feedrate used during roughing passes.
Default is last programmed feedrate.
Default is last programmed feedrate.
RetractHgt
P
Z-axis absolute start and finish height (must
be equal to or above "H"), used as a safety/
clearance Z position before making X/Y
moves. Executed in rapid at start and end of
cycle. Defaults to current Z position at
beginning of cycle.
be equal to or above "H"), used as a safety/
clearance Z position before making X/Y
moves. Executed in rapid at start and end of
cycle. Defaults to current Z position at
beginning of cycle.
Coarse
Tool
Tool
T
Number of tool used for previous roughing
cycle.
cycle.
SkipRough
E
Yes = Roughing pass is skipped, only finish
pass is performed.
No = Roughing pass is performed. (Default)
pass is performed.
No = Roughing pass is performed. (Default)
SkipFinish
F
Yes = Finish pass is skipped, only rough
pass is performed.
No = Finish pass is performed. (Default)
pass is performed.
No = Finish pass is performed. (Default)
FinishDir
Q
Select Cw or Ccw.