Acu-Rite CNC 3500i User Manual
274
9 Running a Program on the Machine
9.1 Running a pr
ogr
am
Restart Position:
After making the manual movements it may be desired to reset the
axes back to their original positions from the program execution,
before any manual movements were made.
axes back to their original positions from the program execution,
before any manual movements were made.
While in the Jog menu, touch the Restart Position button to open
the position reset menu on the bottom menu bar.
the position reset menu on the bottom menu bar.
Touch the button that corresponds to the action desired.
The Restart positions dialog will display the original position of the axis
or axes before the manual movements were conducted. The choice
can be made to restart each individual axis to that corresponding
position, or to restart all axes to their respective positions shown. Only
axes that were moved will be available to restart the position.
or axes before the manual movements were conducted. The choice
can be made to restart each individual axis to that corresponding
position, or to restart all axes to their respective positions shown. Only
axes that were moved will be available to restart the position.
Touch Restart X to return the X-Axis to the original position shown.
Touch Restart Y to return the Y-Axis to the original position shown.
Touch Restart Z to return the Z-Axis to the original position shown.
Touch Restart U to return the U-Axis to the original position shown.
Touch All Axes to return all applicable axes to the original positions
shown.
shown.
Touch Cancel Program to cancel the program run entirely.
Once the desired choice has been selected, press Start to move the
axis/axes to the original positions.
axis/axes to the original positions.
The 3500i will now prompt you to press Start to continue with normal
program execution.
program execution.