Acu-Rite CNC 3500i User Manual
ACU-RITE 3500i
297
1
0
.1 CAM Pr
ogr
a
mming
Setup tab:
Tool: Once the tool has been entered into the tool table, its tool
number can be entered here.
number can be entered here.
Feed: The tool feed rate is entered here. This is automatically
calculated if tool being used is defined in the Tool Table.
calculated if tool being used is defined in the Tool Table.
Coolant: Choose None, On or Off. See "Coolant" on page 290.
Spindle Dir: Choose Forward, Reverse, Off or None. See "Spindle
Direction" on page 290.
Direction" on page 290.
Spindle Speed: Specify spindle speed. See "Spindle Speed" on page
290.
290.
Bolt Hole tab:
The Bolt Hole tab must have the appropriate data filled in to use the
Bolt Hole option in the Drill Location selection.
Bolt Hole option in the Drill Location selection.
Diameter: The diameter of bolt hole circle pattern can be entered
here.
here.
# Holes: The number of holes in the pattern are entered in this field.
Start Angle: The starting angle of the pattern is entered in this field.
Path: Choose the machine movement required: Linear, or Radial.
X Center: Location of the center of rotation in the X axis.
Y Center: Location of the center of rotation in the Y-axis.
End Angle: The end angle of the last hole.
Index Angle: This is the angle to rotate the Polar Coordinate
System by.
System by.