Acu-Rite CNC 3500i User Manual
ACU-RITE 3500i
303
1
0
.1 CAM Pr
ogr
a
mming
Pocket Finish Cycles
The Pocket Finish Cycles tool path is used to generate a bottom and/
or side pocket finish cycle. A Pocket Cycle tool path is required prior
to the pocket finish cycle. The Pocket Finish cycle uses the shape and
islands specified in the previous Pocket cycle.
or side pocket finish cycle. A Pocket Cycle tool path is required prior
to the pocket finish cycle. The Pocket Finish cycle uses the shape and
islands specified in the previous Pocket cycle.
Bottom tab:
Bottom Finish: Check this box to use the bottom finish parameters
in the finish cycle.
in the finish cycle.
Tool: Enter the tool number to use for the cycle.
Ramp Feed: Enter the ramp feed. Automatically calculated if tool
being used is defined in the Tool Table.
being used is defined in the Tool Table.
Ramp Feed = (Rough Feed + Finish Feed) ÷ 2.
Finish Feed: Enter the XY axes finish feed rate.
Coolant: Choose None, On or Off. See "Coolant" on page 290.
Spindle Dir: Choose Forward, Reverse, Off or None. See "Spindle
Direction" on page 290.
Direction" on page 290.
Spindle Speed: Enter the spindle speed.
Finish Dir: Direction of the finish pass (CW or CCW).
Side tab:
Side Finish: Check this box to use the side finish parameters in the
finish cycle.
finish cycle.
Z Depth: Enter the absolute depth of the finished pocket.
Depth Cut: Enter the Z-axis increment used for each pass.
Side Stock: Enter that amount of side stock to be left for additional
finish operations if required.
finish operations if required.
Tool: Enter the tool number to use for the cycle.
Ramp Feed: Enter the ramp feed. Automatically calculated if tool
being used is defined in the Tool Table.
being used is defined in the Tool Table.
Ramp Feed = (Rough Feed + Finish Feed) ÷ 2.
Finish Feed: Enter the XY axes finish feed rate.
Coolant: Choose None, On or Off. See "Coolant" on page 290.
Spindle Dir: Choose Forward, Reverse, Off or None. See "Spindle
Direction" on page 290.
Direction" on page 290.
Spindle Speed: Enter the spindle speed.
Finish Dir: Direction of the finish pass (CW or CCW).
Comment Tab:
Add a comment if needed that will be placed in program. See
sample "Comment tab:" on page 298.
sample "Comment tab:" on page 298.