Acu-Rite CNC 3500i User Manual

ACU-RITE 3500i



Unwanted lines now need to be trimmed from the final shape.  
Select the geometry Trim button from the Modifying Toolbar to 
complete the geometry.  See "Modifying Tools Buttons:" on page 
307.



Select the Trim button from the Modifying Toolbar in 

the main Toolbar.



The Prompt bar will ask that the objects to be trimmed should be 
selected.  Select the two circles.



The Prompt bar will ask what geometry the objects should be 
trimmed against.  Select the two lines.



The Prompt bar will ask what objects to keep.  Select the two 
outside radius. Available pieces of geometry highlight as the cursor 
hovers over it.



Now touch in an open area in the display.  Both inside radius will be 
removed.



The geometry will now appear as one continuous line, radius at each 
end.



This geometry can now be used to create a shape which can then 
be used in a tool path for milling a pocket, or an island.  Once 
defined, this can be copied, used as a pattern, array, or another 
application may apply.



Before creating the tool paths, the shape must be created as 
described here.