3com 3CRWE52196 User Guide
Wireless Settings
51
same Service Area Name/SSID, channel and encryption settings as the
Gateway can connect to it.
Gateway can connect to it.
Select Only Authorised Wireless PCs can connect to the Gateway to
enable and configure this feature.
enable and configure this feature.
If you enable this feature from a Wireless PC, it will automatically be
added to the Authorised Wireless PC list.
added to the Authorised Wireless PC list.
Authorised Wireless PCs
Figure 37 Connection Control Detail Screen
To create a list of Wireless computers that can access the Gateway:
1 Press New.
2 Specify the MAC address of the Wireless PC that is to be allowed to
connect.
The drop down list on the Connection Control window will contain the
MAC addresses of all Wireless PCs that are in range, currently operating,
and have the same Service Area Name/SSID, channel and encryption
settings as the Gateway. You will find this screen easier to use if you set
up and make a note of all of your wireless PC's on your network first. You
may also add the entries manually if you know the MAC address.
MAC addresses of all Wireless PCs that are in range, currently operating,
and have the same Service Area Name/SSID, channel and encryption
settings as the Gateway. You will find this screen easier to use if you set
up and make a note of all of your wireless PC's on your network first. You
may also add the entries manually if you know the MAC address.
To add a MAC address that is not in the list, select Add Manually from the
list, and enter the MAC address in the appropriate fields. A MAC address
consists of 12 characters. Valid characters are '0-9', and 'A-F'.
list, and enter the MAC address in the appropriate fields. A MAC address
consists of 12 characters. Valid characters are '0-9', and 'A-F'.