Sony BKM-FW32 User Manual
11
GB
Operations from a Computer
CLOSED CAPTION (closed caption)
Displays closed captions.
Displays closed captions.
When PICTURE MODE is set to any of
User1, User2 and User3, you can adjust the
following items.
Refer to the Operating Instructions for the
FWD series as well.
User1, User2 and User3, you can adjust the
following items.
Refer to the Operating Instructions for the
FWD series as well.
Contrast +/– buttons
Adjusts the picture contrast.
Adjusts the picture contrast.
Brightness +/– buttons
Adjusts the picture brightness.
Adjusts the picture brightness.
Chroma +/– buttons
Adjusts color intensity.
Adjusts color intensity.
Phase +/– buttons
Adjusts color tones.
Adjusts color tones.
Setup window
“Network Password” screen appears.
The factory default settings are as fallows:
The factory default settings are as fallows:
Name:
root
Password: fw32ad
After you have made any changes or
entered information, click “Apply” at the
bottom of each screen to enable the
settings. Special characters cannot be used
in the text fields.
The settings entered or changed in each
window become valid after you click Apply
located near the bottom of the window.
You cannot enter special characters in this
window.
entered information, click “Apply” at the
bottom of each screen to enable the
settings. Special characters cannot be used
in the text fields.
The settings entered or changed in each
window become valid after you click Apply
located near the bottom of the window.
You cannot enter special characters in this
window.
Owner Information
Owner
Enter information on the owner.
Enter information on the owner.
Display Location
Enter the location of the Display unit.
Enter the location of the Display unit.
Memo
You can write comments or notes here.
You can write comments or notes here.
Time
Time
Enter the current time and the day of the
week.*
Enter the current time and the day of the
week.*
* For the FWD-50PX1/50PX1N, enter the
current time only.
Network
Internet Protocol (TCP/IP)
Under normal circumstances, set this item
to “Obtain an IP address automatically
(DHCP).” Enter the required value
(address) if you set it to “Specify an IP
address.”
Under normal circumstances, set this item
to “Obtain an IP address automatically
(DHCP).” Enter the required value
(address) if you set it to “Specify an IP
address.”
Password
Names and Passwords can be set
individually for the Administrator and each
User. The Name for the Administrator is
permanently set to “root.”
Names and Passwords can be set
individually for the Administrator and each
User. The Name for the Administrator is
permanently set to “root.”
Mail Report*
If an error occurs inside the Display unit,
the system immediately reports the error by
sending an e-mail (Error Report).
If an error occurs inside the Display unit,
the system immediately reports the error by
sending an e-mail (Error Report).
* Except for the FWD-50PX1/50PX1N.
Address (Destination)
Enter an e-mail address in each text box.
The error report can be sent to four
destinations at the same time. The
maximum number of characters of each e-
mail address is 64.
Enter an e-mail address in each text box.
The error report can be sent to four
destinations at the same time. The
maximum number of characters of each e-
mail address is 64.
Mail Account
Mail Address:
Enter the e-mail address assigned to this
device.
The maximum number of characters of the
address is 64.
Outgoing Mail Server (SMTP) (SMTP
server):
Enter the address of the SMTP server.
The maximum number of characters of the
address is 64.
Mail Address:
Enter the e-mail address assigned to this
device.
The maximum number of characters of the
address is 64.
Outgoing Mail Server (SMTP) (SMTP
server):
Enter the address of the SMTP server.
The maximum number of characters of the
address is 64.