Cisco CAB-V35MT= User Manual

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
Overview
DTE or DCE?
      Male or Female
      Signaling
      Ordering
Cisco 7000 Series Cables
Cisco AGS+ Cables
Cisco 4000 Series Cables
      NP−2T Cables
      NP−4T Cables
Cisco 3000 Series Cables
Cisco 2500 Series Cables
Cisco 500−CS Series Cables
Related Information

This document guides you through the process of selecting the right serial cables for your network.

There are no specific requirements for this document.

This document is not restricted to specific software and hardware versions.

The information presented in this document was created from devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If you are working in a live
network, ensure that you understand the potential impact of any command before using it.

For more information on document conventions, see the Cisco Technical Tips Conventions.

One of the critical parts of setting up any router is the selection of the serial cables to connect the router to the
serial devices in your network. There are so many different serial cables, with seemingly similar features,