VTech 2S User Manual

Cannot connect to Wi-Fi. The Wi-Fi is

disabled.

Press

to enable Wi-Fi.

The firmware of
the

InnoTab

2S is

not up-to-date or

the tablet has not

been registered

on Learning Lodge
Navigator

, and make

sure the firmware is the most

up-to-date version. For the

instructions, please see the
Getting Started With Wi-Fi

section on page 8.

Wi-Fi is enabled,

but there is no Wi-Fi

network available.

There is no Wi-Fi

network in your

location or network

signal is weak.

Move to a location that has an

available Wi-Fi network.

Wi-Fi network is

available, but the

connection failed.

The selected

network is not

configured properly

or authentication is

required.

Make sure the network is

configured properly and there

is no firewall blocking Internet

access. If a password is needed,

make sure the correct password

is entered with the appropriate

uppercase/lowercase letters

indicated.

If your

InnoTab

2S does not respond to an inserted cartridge, please

carefully try the following:
• Remove all batteries and unplug all wiring.
• Use a cotton swab dipped in rubbing alcohol or an alcohol-based window

cleaner to gently clean the contact area of the cartridge slot.

• If necessary, dry all the clean contact areas with a soft, lint-free cloth.
• Please make sure that all parts are completely dry before restoring electricity.
Static electricity may cause the

InnoTab

2S to malfunction. In some

cases, the game play score stored in the tablet memory may be lost. In

cases where

InnoTab

2S is malfunctioning due to static electricity, reset

the tablet by removing and reinstalling the batteries, or by unplugging and

replugging the AC adaptor. Or, if the static electricity malfunction occurred

during the downloading process, disconnect the USB cable, delete the

corrupted file, and reset the tablet as described above. Then reconnect

the USB cable and restart the download process.

For more information and troubleshooting tips, visit
www.vtechkids.com/tutorials/innotab2

SUppO