Transition Networks FBRM1XXX-1XX User Manual

Section ll:  FBRM/BFFG Hardware Installation 

Transition Networks 

  

  Use of controls, any adjustments, or the performance of procedures other than 

those specified herein may result in hazardous radiation exposure.  

  Visible and invisible laser radiation when open: DO NOT stare into the laser-

light beam or view the beam directly with optical instruments. Failure to 
observe this warning could result in an eye injury or blindness. 

  

To install the fiber cable, do the following: 

 

1.    Locate a 100/1000Base-FX/SX/LX compliant fiber cable with male, 

two-stranded connectors installed at both ends. See Figure 14. 

2.    Connect the fiber cables to the FBRM or BFFG Devices as shown in 

Figure 14. 

 

 

   

20