SATO ct4i User Manual

 

Cleaning the Platen and Paper Roller
1.   Before starting, get ready an approved cleaning kit from your 

SATO dealer or the kit supplied with the printer. Make sure the
printer is OFF, and remove the power cable.

2. Lift up the Top Cover. 
3. The platen roller is the black rubber roller near the front panel. 

The print rollers are located at the print head assembly, near the 
fanfold-label loading window.

4. Wet some cotton swabs with cleaning solution. While rotating 

the platen roller with your fingers, clean the entire length of the 
roller using one or more cotton 
swabs. The roller should be cleaned of any label or 
adhesive residue.

5. Repeat the whole cleaning process if necessary. The platen 

and rollers should be cleaned whenever foreign matter such as 
dust or adhesive is present.