Citizen CLP-9001 User Manual

 

− 

6 

−

 

 

 

Do not put the printer in areas with high-humidity or heavy 
condensation. If moisture has condensed on the printer, turn off the 
power switch immediately and leave the printer for a while until the 
moisture dries up. Using the printer when damp may result in electrical 
shock.

 

Before carrying the printer, be sure to remove the plug from the outlet 
and the connecting cable to the outer equipment. If left connected, the 
power cord and connecting cable may be damaged, leading to fire and 
electrical shock. 

Do not transport the printer while loaded with paper or ribbon. If paper 
is loaded, it may drop out, leading to injury or internal damage to the 
printer. 

When placing the printer on a floor or desk, be careful not to catch your 
fingers and hands under the feet of the printer.

 

Never operate the power switch or insert/remove the power or data 
cord with wet fingers. Failure to observe this precaution may result in 
electrical shock.

 

Do not put a heater near the power cord. A nearby heater can melt the 
power cord casing, resulting in fire or electrical shock. 

When removing the plug of the power cord from the outlet, be sure to 
grip the plug, not the cord, when pulling it out. Pulling the cord may 
expose the core or break the wire, leading to fire or electrical shock.