DYMO LabelManager420P User Manual
3
Inserting the Label Cassette
Your label maker uses DYMO D1 label cassettes.
To insert the label cassette
1
Lift the label cassette cover to open the label
compartment. See Figure 4.
compartment. See Figure 4.
2
Make sure the tape and ribbon are taut
across the mouth of the cassette and
that the tape passes between the label
guides. See Figure 5.
across the mouth of the cassette and
that the tape passes between the label
guides. See Figure 5.
If necessary, turn the ribbon rewind
spool clockwise to tighten the ribbon.
spool clockwise to tighten the ribbon.
3
4
Close the label cassette cover.
Printing Your First Label
The first time you turn on the power, you are
asked to select the language and label width.
These selections remain set until you change
them.
asked to select the language and label width.
These selections remain set until you change
them.
To set up the label maker
1
Press
to turn on the power.
2
Select the language and press
.
3
Select the width of the label cassette currently in the label maker and
press .
press .
Figure 4
Label
guides
Ribbon
rewind
spool
Figure 5
Figure 6