DYMO RH-6000 User Manual
DYMO
®
6000 Labelmaker
11
UL/BOX
One press underlines the complete label.
A second press puts a line box around the complete label.
Pressing a third time gives underline and line box.
Press again to cancel and return to normal text.
+
UL/BOX
NEW
Clears the current label from the display and resets the Labelmaker
to normal settings — i.e. auto-scaling, normal text, normal width,
left-justified, all function options OFF.
to normal settings — i.e. auto-scaling, normal text, normal width,
left-justified, all function options OFF.
WIDTH
Selects double, reduced or normal width characters, as shown
on the display. Affects the whole label.
on the display. Affects the whole label.
+
WIDTH
JUSTIFY
The complete label is normally left-justified (L), i.e. each line starts
at the left-hand side. Press to step through centred ( ) right justified
( ) or return to left justified.
at the left-hand side. Press to step through centred ( ) right justified
( ) or return to left justified.
M in
Press to store a copy of the current label in the next available
memory space. The display will change to show ‘M’ for one second
to confirm — see ‘Memory’, page 15.
memory space. The display will change to show ‘M’ for one second
to confirm — see ‘Memory’, page 15.
+
M in
MC
Press
+
M in
MC
to clear a stored label from the memory.
Can only be used after using ‘MR’ or ‘SEARCH’ functions.
COPIES
Displays a small box enabling you to use
▲
or
▲
to select the
number of multiple copies of a label. Press ESC to cancel.
+
COPIES
123...n
Enables a number label or barcode label to be incremented by 1 on
each of up to 100 copies of a label. Press ESC to cancel.
each of up to 100 copies of a label. Press ESC to cancel.
CASSETTE
Press to select the correct label format for the tape cassette
installed. If the label format/tape width are incompatible, there will
be no response to the
installed. If the label format/tape width are incompatible, there will
be no response to the
PRINT
key and the display will flash to show
the tape width installed; flashing stops when the correct label
format is selected. Note that the layout of the text on the label may
be altered.
format is selected. Note that the layout of the text on the label may
be altered.
+
CASSETTE
LENGTH
Displays the current label length. Press ESC to cancel or use
▲
or
▲
to increase or decrease the label length in 2mm (
1
/¡º
") steps.
Label length can be fixed with the text justified to the left, centre or
right of the label (
right of the label (
displayed), or the text can be scaled to fit the
length of the label (|A| displayed) — see page 33.
VERT
Rotates the complete label through 90
°
, as indicated in the display.
Text is printed vertically. Press again to cancel.
+
VERT
COLOUR
Press to change the print colour of the label at the cursor position.