DYMO 9000 User Manual

7

label), or CUT and TAB cut for easy removal from the
backing tape.

LANGUAGE
• Press 

 to step through the operating languages

available on the Labelmaker. The SET UP display will
change accordingly .

• Press 

 to change to the selected language and

return to edit mode. The Labelmaker will retain the
chosen operating language until you change it again.

UNITS
• Press 

 to choose between UNITS of measure

INCHES or MM, as shown in the status bar.

PC LINK
• Press 

 to select PC LINK mode when the

Labelmaker is connected to a PC – see the
instructions accompanying the software for details.

• The display will change to show

to confirm PC LINK mode selection. Note that the
Labelmaker will not respond to the keyboard in PC
LINK mode, with the exception of the 

ESC

 key.

• Press 

ESC

 to cancel PC LINK mode and return to

normal operation.

• Check and clean the print head and pinch roller

regularly.
Follow the instructions packed with the cleaning tool.
Moisten the cleaning tool with alcohol and clean the
pinch roller and print head as shown  

• After cleaning, store the tool in the lid 

for future

use.

No display
• check machine is on
• check AC adaptor connected, plugged in and

switched on.

 wrong cassette fitted for label to be

printed. See CASSETTE option in ‘SET UP’ menu.

 ink cassette missing or lid open

 label not removed from cutter area - remove

before printing next label

 label tape run out – replace the cassette

 ink tape run out – replace the cassette

 printhead overheat safety cutout warning.

May occur if printing many labels with dense image.
Stops for 3 minutes for head to cool, then resumes
printing automatically.

• check correct tape and ribbon cassettes installed
• check tape cassette installed correctly
• clean the print head.
Poor cutter performance

 cutter jammed – clear jam and clean cutter

• clean the cutter blade regularly.
Poor tab cuts
• replace tab cutter blade 

screw in the top of the cutter block, then pull it
straight up to remove.
WARNING – the blade is extremely sharp!

 in the display indicates a printer jam. Press any

key to return to normal display. Open the cassette
compartment and free the jam.

No success?
• Call the customer service telephone number in your

country – see the warranty booklet.
In the USA, call 800-645-6051
In Canada, call (905) 670-2222

°C/°F

?

➧➧