DYMO Rhino 5200 User Manual
17
To use advanced serialization
1. Enter the text for your label.
2. Press
1. Enter the text for your label.
2. Press
+ .
3. Select Advanced and press
.
A box appears around the character where the
cursor was positioned.
cursor was positioned.
4. Select the first character position you want to
increment and press
.
5. Select the amount you want to increment this
character position and press
.
You can choose to increment in steps up to 10.
6. Select the number of times to increment this
character position and press
.
character position you want to increment.
You can choose to create up to 99 labels.
You can choose to create up to 99 labels.
A new label is added in the display for each label in
the series.
the series.
Printing Options
You can choose to print multiple copies of the same
label, collate the copies, pause to cut between labels,
advance the label, and adjust the print contrast.
label, collate the copies, pause to cut between labels,
advance the label, and adjust the print contrast.
Printing Multiple Copies
You can print up to 99 copies of the same label at
one time.
To print multiple copies
one time.
To print multiple copies
1. Press
+ .
2. Press the S arrow to increase the number of
copies to print (maximum is 99). The default is
2 copies.
2 copies.
3. Press the T arrow to decrease the number
of copies.
4. Press
or
to begin printing.
You may notice a brief pause in printing
between each label for more complex formats.
When printing is finished, the number of copies to
print returns to 2.
When printing is finished, the number of copies to
print returns to 2.
Collating Multiple Copies
When printing multiple copies of a label file
containing more than one label, all the copies
of a label are printed before the next label
starts printing. You can choose to have the
label file print collated, so each complete copy
of the file prints before the second copy starts.
The following example shows three copies of a
label file containing three labels printed
normally and collated.
Normal
A101 A101 A101 A102 A102 A102 A103 A103 A103
Collated
A101 A102 A103 A101 A102 A103 A101 A102 A103
To collate multiple copies
1. Press .
2. Select Collate copies and press
containing more than one label, all the copies
of a label are printed before the next label
starts printing. You can choose to have the
label file print collated, so each complete copy
of the file prints before the second copy starts.
The following example shows three copies of a
label file containing three labels printed
normally and collated.
Normal
A101 A101 A101 A102 A102 A102 A103 A103 A103
Collated
A101 A102 A103 A101 A102 A103 A101 A102 A103
To collate multiple copies
1. Press .
2. Select Collate copies and press
.
3. Select On.
4. Press
4. Press
and then select Done (OK).
Pausing Between Labels
By default the printer pauses after printing each
label so you can cut the label. You can turn this
feature off to have the labels print continuously.
To set the printer to print continuously
1. Press .
2. Select Pause to cut btw labels and
label so you can cut the label. You can turn this
feature off to have the labels print continuously.
To set the printer to print continuously
1. Press .
2. Select Pause to cut btw labels and
press .
3. Select Off.
4. Press
4. Press
and then select Done (OK).
Advancing the Label
The default leader space for all labels is
approximately 5/16” (10 mm). To add additional
blank space to the beginning or end of your label,
you can feed the label in 5/16” (10 mm) increments.
To advance the label
1. Press
approximately 5/16” (10 mm). To add additional
blank space to the beginning or end of your label,
you can feed the label in 5/16” (10 mm) increments.
To advance the label
1. Press
+
.
2. Press
to advance the label.
T
F
I
H
S
T
F
I
H
S
T
F
I
H
S