Sharp FO-2150CM User Manual
UX-2200CMU/CMC
FO-2150CMU/CMC
–
1
–
[1] Engine Specifications
1. Mechanism
Resolution
: 600 dpi x 600 dpi addressability
Print Speed
: 3 PPM draft text with black cartridge
Print Swath
: 8 inches
Duty Cycle
: Up to 500 pages per month maximum, 170 pages per month average
Dimensions (approximate) : 350mm x 125mm x 60mm
Weight (approximate)
Weight (approximate)
: 1.2 pounds
Acoustics
: 45 dBA in letter quality mode (using Lexmark paper feed and covers which is not
included)
included)
2. Electrical
No electrical hardware included with the type B engine except for the carrier drive stepping motor and the Sensor
FPC assembly whitch includes a photo interrupter for sensing home position, the carrier cables and the printhead
cable.
FPC assembly whitch includes a photo interrupter for sensing home position, the carrier cables and the printhead
cable.
3. Print Cartridges (Print Cartridges are supply items and sold separately)
Black Print Cartridge : 56 Nozzles
Pigment based(water proof)
High yield cartridge Up to 1000 pages at 5% coverage
High yield cartridge Up to 1000 pages at 5% coverage
Color Print Cartridge : 48 Nozzles(16 Nozzles each of cyan, magenta and yellow)
Fade resistant ink
300 pages average at 15% coverage of 3 colors (5% coverage of each color)
300 pages average at 15% coverage of 3 colors (5% coverage of each color)
[2] Abbreviations
EOF
End-of Form
ESD
Electrostatic Discharge
FRU
Field Replaceable Unit
HVPS
High Voltage Power Supply
LVPS
Low Voltage Power Supply
NVRAM
Nonvolatile Random Access Memory
OEM
Original Equipment Manufacturer
POST
Power-On Self Test
V ac
Volts alternating current
V dc
Volts direct current
ZIF
Zero Insertion Force
[3] Diagnostic Information
Start
Power-OnSelf Test (POST) Sequence
Power-OnSelf Test (POST) Sequence
When you turn the printer on it performs a POST. Turn the machine on and check for a correct POST operation by
observing the following:
observing the following:
1. The carrier moves.
2. The paper feed gears turn.
3. After 30 seconds the carrier moves over the maintenance
2. The paper feed gears turn.
3. After 30 seconds the carrier moves over the maintenance
station and caps the printhead.
4. All motors stop.