Sharp MX-FXX1 User Manual

This function is used to send a fax to an F-code relay broadcast memory box in another machine and have that machine 
relay the fax to multiple end receiving machines.
When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end 
receiving machines can help reduce phone charges. A relay request transmission can be used in combination with the 
timer transmission function to further reduce phone costs.

☞

 (page 70)

• Verify the F-code (sub-address and passcode) and end receiving machines programmed in the relay broadcast memory 

box in the relay machine before you perform an F-code relay request transmission.

• Before this function can be used, the end receiving machines must be programmed in the F-code relay broadcast memory 

box in the relay machine.

• The end receiving machines do not need to support F-code communication.

• This function can be used in combination with a broadcast transmission or timer transmission. An F-code relay request 

transmission can also be stored in a program.

• Your machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to the 

relay machine. The relay machine bears the cost of sending the fax to each of the end receiving machines.

System Settings: F-Code Memory Box
This is used to create memory boxes for F-code relay broadcast transmission.
A memory box name, sub-address, passcode, and end receiving machines are programmed in each box.

Place the original face up in the document feeder tray, or face down on the document glass.

Transmission

The fax is transmitted to 
each of the end receiving 
machines programmed in 
the F-code relay 
broadcast memory box.

Relay machine
F-code relay broadcast 
memory box

Box name:

BBBB

Sub-address:

AAAAAAAA

Passcode:

XXXXXXXX

Sub-address:

AAAAAAAA

Passcode:

XXXXXXXX

End receiving machines are 
programmed in this box