Citizen CLP-9301 User Manual

− 

25

 

−

 

4.  Insert the bobbins into the source ribbon and destination paper cores respectively. 

 

 

 

 

 

 

 

 

 

 

5.  Fit the destination paper core with the bobbin on the left side ribbon shaft holder and click into 

position. 

 

6.  Feed the ribbon bobbin a certain length and set it on the right side ribbon shaft holder and click into 

position. 

 

7.  Pass the ribbon through the lower side of the printhead block onto the destination ribbon core. At this 

time, the end of the ribbon is stuck to the destination ribbon core using the adhesive leader supplied 

with our genuine consumables. Alternatively, clear adhesive tape may be used. Remove any slack in 

the ribbon by winding the destination ribbon core clockwise. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8.  Turn the blue printhead lever counterclockwise to lock the printhead block. 

 

 

Adhesive leader (or clear adhesive tape)