Toshiba GA-1190 User Manual

Network Setting Checklists    47

1

Are the IPX/SPX protocol 
enabled? Is the correct 
frame type selected?

Next Step

Ø

Ö

Set up the IPX/SPX correctly.

2

If applicable, did you suc-
cessfully set up queue-
based printing?

Next Step

Ø

Ö

Set up the NetWare server prop-
erly.

3

Did you configure this 
equipment for NetWare con-
nection?

Next Step

Ø

Ö

Set up the NetWare network set-
tings correctly.

4

Did you configure this 
equipment for Novell print 
service?

Next Step

Ø

Ö

Set up the Novell print service 
correctly.

5

Were the proper printer driv-
ers installed?

Next Step

Ø

Ö

See the Printing Guide to install 
proper printer drivers.

6

Is the IPP port configured 
with correct URL?

Next Step

Ø

Ö

See the Printing Guide to config-
ure the proper port.

7

Can you see this equipment 
in Windows Network Neigh-
borhood?

Next Step

Ø

Ö

Check that the SMB protocol is 
enabled in client computers.

8

Can you print to this equip-
ment?

Ö

Refer to the following section to 
troubleshoot the condition.

1

Is AppleTalk enabled on this 
equipment?

Next Step

Ø

Ö

Enable the AppleTalk.

2

Are the IP Address proper-
ties correctly set?

Next Step

Ø

Ö

Set up the IP address correctly.

3

Is this equipment available 
in the Chooser when you 
click the LaserWriter 8 
printer icon?

Next Step

Ø

Ö

Make sure the AppleTalk zone is 
supported by the Macintosh cli-
ent.

4

Can you access any other 
network device from the 
Macintosh computer?

Next Step

Ø

Ö

Refer to your Macintosh network-
ing documentation or contact 
Macintosh technical support.

5

Can another Macintosh 
computer on the network 
print to this equipment? If 
so, compare the settings to 
determine which need to be 
changed to support printing 
from this machine.

Ö

Refer to your Macintosh network-
ing documentation or contact 
Macintosh technical support.