KYOCERA 2540 User Manual

3-4

System Menu

Set EcoPrint for default settings mode. The setting items are as follows.

For more information on EcoPrint, refer to page 1-28. 

1

Referring to Accessing the Copy Default screen on page 3-2, access 
the Copy Default screen. 

2

Press [S] or [T] to select EcoPrint and press [Change #]. 

3

Select [Off] or [On]. 

4

Press [Close] to save settings or [Back] to cancel settings. The 
display returns to the Copy Default screen. 

If the background on copies appears too dark, you can lighten it. The 
setting items are as follows.

1

Referring to Accessing the Copy Default screen on page 3-2, access 
the Copy Default screen. 

2

Press [S] or [T] to select Background Density Adj and press 
[Change #]. 

3

Press [Lighter] or [Darker] to adjust the density. 

4

Press [Close] to save settings or [Back] to cancel settings. The 
display returns to the Copy Default screen. 

Set Black Line correction to reduce the black lines (dragged stains not 
appearing on the original) that may occur when copying using the 
optional document processor. The setting items are as follows.

1

Referring to Accessing the Copy Default screen on page 3-2, access 
the Copy Default screen. 

2

Press [S] or [T] to select Correcting Black Line and press [Change 
#].

Off

Do not enable EcoPrint. 

On

Enable EcoPrint. 

Lighter

Lightens the background color in copies.

Darker

Darkens the background color in copies.

Off

Disables Black Line correction.

On (Low)

Suppress black streaks moderately.

On (High)

Suppress black streaks strongly.

Note When suppressing black streaks, select [On (Low)]. Select 
[On (High)] only when the black streaks are not suppressed with 
the Low setting.

When black line correction is enabled, the ability to reproduce fine 
text characters is reduced. For normal usage, the default setting 
([Off]) is recommended.