Xerox PE220 User Manual

Press Menu until “Fax Setup” appears on the top line of the display. 

The first available menu item, “Default-Change”, displays on the bottom 
line.

Press the scroll button (  or  ) until you see the desired menu item on the 
bottom line and press Enter. 

If you select “Default-Change”, you will see “Resolution”. Press Enter 
again. 

Use the scroll button (  or  ) to find the desired status or use the number 
keypad to enter the value for the option you have selected.

Press Enter to make your selection. The next Fax Setup option appears.

If necessary, repeat steps 2 through 4.

To return to Standby mode, press Stop/Clear.

You can change the default resolution value. 
Standard for documents with normal sized characters.
Fine for documents containing small characters or thin 
lines, or for sending documents printed using a dot-matrix 
printer.
Super Fine for documents containing extremely fine detail. 
Super Fine mode is enabled only if the remote machine 
also supports Super Fine resolution. 
Photo for documents containing shades of gray or 
photographs.
Color for documents with colors. Sending a color fax is only 
possible if the receiving machine supports color fax 
reception and you send

 

the fax manually. In this mode, 

memory transmission is not available.

You can specify the number of times the machine rings, 
from 1 to 7, before answering an incoming call.

You can select the default contrast mode to fax your 
documents lighter or darker.
Lighten works well with dark print.
Normal works well with standard typed or printed 
documents.
Darken works well with light print or faint pencil markings.