Xerox PE220 User Manual

Press Menu on the control panel until “Maintenance” appears on the top 
line of the display. 

Press the scroll button (  or  ) to display “Notify Toner ” on the bottom 
line and press Enter.

 Enter a four-digit password you want to use, using the number keypad 
and press Enter.
(If you select this menu, for the first time after purchasing or after clearing 
all memory, re-enter the password to confirm it and press Enter.)

Press the scroll button (  or  ) to change the setting. 

Select “On” to enable this feature. 

Selecting “Off” disables this feature.

Press Enter to save the selection.

To return to Standby mode, press Stop/Clear.

You can clean the OPC drum in the print cartridge manually or automatically.

If there are streaks or spots on your prints, the OPC drum in the print cartridge 
may require manual cleaning.

Before starting the cleaning procedure, make sure that paper is loaded in 
the machine. 

Press Menu on the control panel until “Maintenance” appears on the top 
line of the display. The first available menu item, “Clean Drum”, displays 
on the bottom line.

Press Enter. The first available menu item, “Yes” displays on the bottom 
line.

Press Enter. The machine prints out a cleaning page. Toner particles on 
the drum surface adhere to the paper. 

If the problem remains, repeat steps 1 through 4.

To return to Standby mode, press Stop/Clear.