OKI 5400 User Manual

Programming

69

21:REMOTE DIAGNOSIS: The remote diagnostics feature allows a 
service person to remotely dial and service your fax machine. Available 
settings are on and off. 

22:PC/FAXSWITCH: When your fax machine is set to answer in PC 
Receive Mode and your optional MFP software is set to receive fax 
messages, all incoming calls are transferred directly to your PC. However, 
if you are experiencing a problem with your PC, you can tell your fax 
machine to receive and print faxes locally by setting this function to on. 
Available settings are on and off.

23:ONE TOUCH PARAM: This function allows you to make changes to 
the communications settings for a specific One Touch key, without 
changing the normal communication settings used by your fax machine. 
For instructions on changing One Touch Parameters settings for a One 
Touch key, see One Touch parameters in Dial Directories. 

1.

Press the Select Function key.

2.

Press the 9/User Program One Touch key. The display shows 
1:FUNC. PROGRAMMING.

3.

Press the YES key. The display shows FUNCTION NO. [

].

4.

Using the numeric keypad, enter the 2-digit number of the function 
you want to change. This display then shows the name of the 
selected function.

5.

Press the NO key to cycle through the settings for the user function, 
then press the YES key to confirm your selection. The name of the 
next user function appears in the display.

6.

Press the Select Function key to finish.

These functions allow you to control the way your fax machine dials 
telephone numbers. Refer to Dial Parameter Settings List to determine 
which settings you may need to change, then refer to Changing Your Dial 
Parameter Settings to make the change.