OKI 5400 User Manual
Problem Solving
91
Engl
is
h
Note:
If the image drum unit has reached the end of its life,
you will also use this function to reset the drum
counter. Refer to Replacing Image Drum Unit above
for more information.
If the image drum unit has reached the end of its life,
you will also use this function to reset the drum
counter. Refer to Replacing Image Drum Unit above
for more information.
1.
Press the Select Function key.
2.
Press the 7/Counter Display One Touch key. The display shows
DRUM COUNT.
DRUM COUNT.
3.
Press the NO key. The display shows the PRINT COUNT.
4.
Press the NO key again. The display shows the SCAN COUNT.
5.
Press the Select Function key to finish.
Problem checklist
Your fax machine is a complex machine with many features and functions
which allow it to operate in different ways. Many problems you experience
may be due to improper programming. If you are experiencing a problem,
read through the list of problems and solutions before calling your dealer.
which allow it to operate in different ways. Many problems you experience
may be due to improper programming. If you are experiencing a problem,
read through the list of problems and solutions before calling your dealer.
Your telephone does not ring if your fax machine is set tel/fax
answering mode and the incoming call is a voice call. This is normal. In
the tel/fax answering mode, your fax machine answers the incoming call
and detects if the call is a voice call or a fax call. If the call is a voice call,
your fax machine will ring, but your telephone will remain silent. It is
recommended that you only use tel/fax answering mode if your telephone
is located near the fax machine.
answering mode and the incoming call is a voice call. This is normal. In
the tel/fax answering mode, your fax machine answers the incoming call
and detects if the call is a voice call or a fax call. If the call is a voice call,
your fax machine will ring, but your telephone will remain silent. It is
recommended that you only use tel/fax answering mode if your telephone
is located near the fax machine.
The display is blank. Check that the power switch is on. Check the power
cord to make sure that it is firmly plugged in. Check your wall outlet to
make sure that it has power.
cord to make sure that it is firmly plugged in. Check your wall outlet to
make sure that it has power.
Nothing happens when you press the control panel keys. Turn the fax
machine off, wait 10 seconds, then turn it on again.
machine off, wait 10 seconds, then turn it on again.
The display tells you to replace paper even though there is paper in the
paper cassette. Take the paper cassette out and make sure that the paper
is firmly stacked in the tray. Push the paper firmly under the plastic tabs
on the edge of the tray. Check for a paper jam in the fax machine.
paper cassette. Take the paper cassette out and make sure that the paper
is firmly stacked in the tray. Push the paper firmly under the plastic tabs
on the edge of the tray. Check for a paper jam in the fax machine.
Your documents jam. Check the document for wrinkles, tears or other
damage. Make sure there are no staples or paper clips and that the paper is
clean and dry. Make sure the document is not wider than your fax machine
damage. Make sure there are no staples or paper clips and that the paper is
clean and dry. Make sure the document is not wider than your fax machine