OKI 5250 User Manual

OKIFAX 5250

|

To stop a transmission in progress, follow the instructions
below.

1 Press the Stop key twice. The display shows 

STOPPED.

2 If documents are stuck partway through the document

feeder, you may see a 

RELOAD DOCUMENT message on

the display. Press the Stop key again. Your fax machine
feeds the document the rest of the way through the
document feeder.

This convenient feature lets you program a number into your
fax machine for future use while you’re sending a fax to it. It
even finds the first available One Touch key (or Auto Dial
number, if all the One Touch keys are programmed) for you
to program.

Use the following procedure:

 1 Load the document.

 2 Enter the fax number using the numerical keypad.

 3 Press the Copy key. The display shows 

ONE TOUCH

NO.[xx].
The number in brackets 

[xx] is the next unprogrammed

One Touch key number.
If all the One Touch keys are programmed, the display
shows 

AUTO DIAL NO.[xx], with the number of the next

unprogrammed Auto Dial number shown in brackets 

[xx].

 4 Press Yes 

§ to program the location to the number shown

or
press Search to cycle through the available unprogrammed
keys/numbers,
then press Yes 

§ to program to the number you want.

Press No 

© to stop the process.

 5 The display reads

NO=5551212 [the fax number you entered] ID=.

Press Start, then enter the location ID. This is a descriptive
title up to 15 characters long. Refer to the instructions
below.