OKI 4510 User Manual

You can set the volume of  the ringing tone when the machine
is in standby mode or is actually ringing.

1 Press u. You will see the current setting displayed for

approximately 3 seconds and hear the volume.

2 To change the value, press u until the desired volume is

reached.

v

v

v

v

v

1 Press l to set the loudspeaker volume.

2 Set the volume using u.

3 Exit using l or STOP.

1 Press MENU and 22. The display shows  BEEPER

VOL.

2 Press START/COPY. Use u to select the volume of

the key tones.

3 To confirm the entry press START/COPY and then STOP

twice.

Energy save mode reduces the energy consumption in standby
mode. You can select how many minutes after the last entry
before energy save mode is activated.

1 Press  MENU  and  335. The display shows SAVE

MODE.

2 Press START/COPY. Use u to select POWER  SAVE.
3 Press START/COPY. Use u to select 5, 15, 30,

60 minutes or OFF.

4 To confirm the entry press START/COPY and then STOP

three times.

The toner save mode decreases the consumption of the toner.
Printing quality may fall off.

1 Press  MENU and 335. The display shows SAVE

MODE.

2 Press START/COPY. Use u to select TONER  SAVE.
3 Press START/COPY. Use u to select ON or OFF.
4 To confirm the entry press START/COPY and then STOP

three times.

You can print out a list of  all functions and settings currently
available.

1 Press MENU, 666 and START/COPY.

2 A list of all settings is printed.