OKI 4510 User Manual

If  there is no paper in the paper tray or if  the toner is empty,
incoming faxes will be stored in memory (around 120 pages
according to Slerexe letter). If an incoming fax has been stored
in memory the display will show FAX IN MEMORY. Once the

paper tray is refilled or the toner replaced all the faxes stored in
memory can be printed out (see Printing from memory).

When a fax has been printed it is deleted from memory. If
printing is interrupted all the faxes that have not yet been printed
in full remain in memory. Once the memory is full no further
pages can be stored.

You can choose whether faxes are to be printed immediately
from memory or later.

1 Press MENU, 333. The display shows 33 MEMORY

MODE. Press START/COPY.

2 Use u to select PRINT NOW (faxes are printed out as

soon as the paper tray is refilled) or PRINT LATER (faxes

are printed out when you want).

3 Press START/COPY and then STOP twice.

If there is a document in memory the display will show FAX
IN MEMORY.

1 Press MEMORY and 3.

2 Press START/COPY. If  faxes are stored they will be

printed out.

You can scan in documents, store them in memory and send
them from memory. When they have been sent, the faxes are
cleared from memory.

1 Place the document to be faxed (maximum of 20 sheets)

loosely in the document feeder, face down.

2 Press MEMORY, 2 and START/COPY.

a If  you want to sent the fax immediately, select 1 NOW

and press START/COPY.

b If  you want to send the fax later select 2 LATER, and

press START/COPY. Enter the time you want to send it
(within 24 hours, e.g.18  30 for 6.30 pm) and press
START/COPY.

3 Enter the fax number and press START/COPY. The docu-

ment will be scanned and sent.

1 Press MEMORY, 4 and START/COPY. The display

shows ARE YOU SURE?

2 Press START/COPY to delete the faxes from memory.

If  the line is busy, automatic redial is activated.

1 If  you wish to cancel automatic redial, press MENU,

774 and then START/COPY.

2 Press START/COPY again to confirm.

D A power failure will clear the faxes from memory.

With this function you can delete faxes or documents from
memory.

1 Press MEMORY, 4 and START/COPY. The display

shows ARE YOU SURE?

2 Press START/COPY to delete the faxes from memory or

press STOP to cancel.

You can send the fax either to a group you have already stored
or to individual numbers.

1 Place the document to be faxed (maximum of 20 sheets)

loosely in the document feeder, face down.

2 Press MEMORY and 2. The display shows 2 BROAD-

CAST.  Press START/COPY.

a If  you want to sent the fax immediately, select 1 NOW.
b If  you want to send the fax later select 2 LATER and

press START/COPY. Enter the time you want to send it
(within 24 hours, e.g. 18  30 for 6.30 pm) and press
START/COPY.

3 The display shows: dial num: group. Enter the re-

cipients:

a If  you want to sent the fax to a group, use u to select

GROUP and press START/COPY. Use u to select

the group. You can also use the digit keys to select a group.

b If you want to send the fax to specific numbers, use u

to select enter NUMBER and press START/COPY.

Enter the number and press START/COPY. If  you want
to enter further numbers, use u to select  ANOTHER ?
Y and enter the press START/COPY to confirm. When

you have finished adding numbers, press ANOTHER? N.