Zebra Technologies 2237A10L010 User Manual

Control Panel

9/6/07

IIIPlus/R110Xi/R170Xi User Guide

13383L-004 Rev. A

The control panel LCD functions differently in different printer modes.

• In Operating mode, the LCD displays the printer’s status, sometimes in conjunction with 

a control panel light (see 

). 

• In Pause mode, the printer stops printing temporarily.

• In Setup mode, you can use the control panel LCD to view or modify printer parameters 

).

• In Error mode, the LCD may display an alert or error message (see 

).

 describes the function of each button.

PAUSE

Stops and restarts the printing process or removes error messages and 
clears the LCD. 

• If the printer is idle, it enters Pause mode immediately.

• If the printer is printing, the label is completed before the printer pauses. 

FEED

Advances a blank label. 

• If the printer is idle or paused, the label is fed immediately. 

• If the printer is printing, the label is fed after printing finishes.

CANCEL

CANCEL

 functions only in Pause mode. Pressing 

CANCEL

 once has these 

effects:

• Cancels the label format that is currently printing.

• If no label format is printing, the next one to be printed is canceled.

• If no label formats are waiting to be printed, 

CANCEL

 is ignored. 

To clear the printer’s entire label format memory, press and hold 

CANCEL

. 

When the formats are cleared, the DATA light turns off.

CALIBRATE

Calibrates the printer for the following:

• Media length

• Media type (continuous or non-continuous)

• Print mode (direct thermal or thermal transfer)

• Sensor values

For more information on calibration, see 

.

SETUP/EXIT

Enters and exits Setup mode.