Zebra Technologies APL-I User Manual
25
Commands
Print Commands
11/24/09
APL-I Reference Guide
14177L-003
Direct Graphics Mode, Select
Purpose To enable faster image printing by not saving the graphic with the
APL-I
format.
Syntax
<ESC>gm
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
The m argument specifies the type of the user-defined graphic data.
Default Value: m = 0
Accepted Values:
Accepted Values:
0 = 8 bits per byte
1 = 8 bits per byte, nibblized
1 = 8 bits per byte, nibblized
Emulation Mode, Enter
Purpose To switch the printer to Emulation mode.
Syntax
<ESC>cn
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
This command allows you to print labels with bar codes in multiples of 10 or 15 mil
that were designed on an 86XX printer.
Default Value: N = 0
Default Value: N = 0
Values for n:
0 =
10 mil dot size
1 =
15 mil dot size for bar codes only.
Everything else is 10 mil.