Zebra Technologies APL-I User Manual
Commands
Print Commands
Print Commands
32
14177L-003
APL-I Reference Guide
11/24/09
Print
Purpose To print the present page or format.
Syntax
<ETB>
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
Prints the format with the data that was previously entered.
Printhead Parameters, Transmit
Purpose To send the number of dots and dot size in the printhead to the host.
Syntax
<ESC>H
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Example This is an example of a transmitted printhead parameter value: 895.5.0.
Program Mode, Enter
Purpose To switch to Program mode.
Syntax
<ESC>P
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
Using this command erases all previously entered data.
Program Number, Transmit
Purpose To send program and version number.
Syntax
<ESC>Mn
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
This command uploads the program number and software version to the host
computer. The data is represented as an ASCII alphanumeric character string.