Zebra Technologies APL-I User Manual
47
Commands
Program Mode Commands
11/24/09
APL-I Reference Guide
14177L-003
Interleaved 2 of 5
Purpose To specify an Interleaved 2 of 5 bar code field.
Syntax
c2,m
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
Things to be aware of:
•
The
c2
command has one argument, m for mode, which defaults to
0
.
•
The Interleaved 2 of 5 bar code supports these modes:
m
Interleaved 2 of 5 Mode
0
No check digit.
1
Printer provides check digit.
2
User provides check digit.
•
Zeros are added to any odd length strings.
Code 2 of 5
Purpose To specify a Code 2 of 5 bar code field.
Syntax
c3,m
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
Things to be aware of:
•
The
c3
command has one argument, m for mode, which defaults to 0.
•
The Code 2 of 5 bar code supports these modes:
m Interleaved 2 of 5 Mode
0 Start/stop code size is 3 bars.
1 Start/stop code size is 2 bars.
0 Start/stop code size is 3 bars.
1 Start/stop code size is 2 bars.