Zebra Technologies APL-I User Manual
Commands
Program Mode Commands
Program Mode Commands
52
14177L-003
APL-I Reference Guide
11/24/09
Code 16K
Purpose To specify a Code 16K bar code field.
Syntax
c9
Partially Supported
Based on testing, this command is partially supported on the Zebra
printer with APL-I firmware with the following differences and outputs:
•
The Zebra printer with
APL-I
firmware does not support linked bar codes, or using a
set of bar codes to print a single data string too large for one bar code.
Code 49
Purpose To specify a Code 49 bar code field.
Syntax
c10
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
Things to be aware of:
•
The c10 command has no arguments.
•
Use a
<SUB>
1 command to symbolize the function 1 character in Emulation mode.
If using Advanced mode, you can symbolize the function 1 character by using the
<SUB><SUB>
1. The same holds true for function characters 2, 3, and 4.
•
To call up a square symbol in Advanced mode, use a height magnification of 1. While
in Emulation mode, use a magnification of 250.
in Emulation mode, use a magnification of 250.
Important Only Alphanumeric (0) and numeric (2) modes are supported by the printer.