Wacom 18SX User Manual
29
Removing Cintiq from the Display Stand
To remove Cintiq from the display stand:
To remove Cintiq from the display stand:
■
If the lock brackets are attached, remove them from the back of Cintiq.
■
Position the display to landscape orientation before removing Cintiq from the display stand.
The stand will not release unless Cintiq is in landscape orientation.
The stand will not release unless Cintiq is in landscape orientation.
■
Next, raise the stand incline to the highest position. See Adjusting the Cintiq Stand on
page 28 for instructions.
page 28 for instructions.
■
Firmly grasp the Interactive Pen Display on both the left and right sides of the body casing, and
lift the unit out of the display stand bearing recess.
lift the unit out of the display stand bearing recess.
Important: When removing Cintiq from the display stand, always lift Cintiq in a direction
parallel to the front of the stand.
parallel to the front of the stand.
Note: When packing Cintiq for transport, always pack the Interactive Pen Display and Cintiq
stand in their original containers and protective cushions. Never pack the two items with the
display unit mounted on the stand; this may damage the display unit or stand during transpor-
tation.
stand in their original containers and protective cushions. Never pack the two items with the
display unit mounted on the stand; this may damage the display unit or stand during transpor-
tation.