Panasonic KX-FP343AL User Manual
7. Programmable Features
39
Code #68: Setting the Error Correction Mode
(ECM)
(ECM)
ECM SELECTION
=ON
=ON
[
±]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
“ON” (default): To send a fax even if there is static
interference on the telephone line.
“OFF”: Deactivates this feature.
transmitting/receiving fax machines are ECM
compatible.
“ON” (default): To send a fax even if there is static
interference on the telephone line.
“OFF”: Deactivates this feature.
L
You cannot change the setting when received
documents are in memory.
documents are in memory.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON
=ON
[
±]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party’s machine.
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party’s machine.
L
If the ring back tone continues, the other
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L
The connecting tone volume cannot be
adjusted.
adjusted.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
“OFF”: Deactivates this feature.
Code #80: Resetting advanced features to
their default settings
their default settings
SET DEFAULT
RESET=NO
RESET=NO
[
±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
L
ECM selection (feature #68, page 39) will
not be reset.
not be reset.
FP343AL.book Page 39 Tuesday, August 5, 2003 3:20 PM