Panasonic KX-FP145AL User Manual
9. Help
55
9 Help
Error Messages
9.1 Error messages –
Reports
Reports
If a problem occurs during fax transmission or
reception, one of the following communication
messages will be printed on the sending and
journal reports (page 27).
reception, one of the following communication
messages will be printed on the sending and
journal reports (page 27).
COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)
(Code: 40-42, 46-72, FF)
L
A transmission or reception error occurred.
Try again or check with the other party.
Try again or check with the other party.
COMMUNICATION ERROR
(Code: 43, 44)
(Code: 43, 44)
L
A line problem occurred. Connect the
telephone line cord to a different jack and try
again.
telephone line cord to a different jack and try
again.
L
An overseas transmission error occurred. Try
using the overseas mode (feature #23, page
48).
using the overseas mode (feature #23, page
48).
DOCUMENT JAMMED
L
The document is jammed. Remove the
jammed document (page 63).
jammed document (page 63).
ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)
(Code: 54, 59, 70)
L
A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.
because of a problem with the other party’s
fax machine. Check with the other party.
JUNK FAX PROH. REJECT
L
The junk fax prohibitor of your fax machine
rejected fax reception.
rejected fax reception.
MEMORY FULL
L
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 15)
or clear the jammed paper (page 61).
due to a lack of recording paper or a
recording paper jam. Install paper (page 15)
or clear the jammed paper (page 61).
NO DOCUMENT
L
The document was not fed into the unit
properly. Re-insert it and try again.
properly. Re-insert it and try again.
OTHER FAX NOT RESPONDING
L
The other party’s fax machine is busy or has
run out of recording paper. Try again.
run out of recording paper. Try again.
L
The document was not fed properly. Re-
insert the document and try again.
insert the document and try again.
L
The other party’s fax machine rings too many
times. Send the fax manually (page 26).
times. Send the fax manually (page 26).
L
The other party’s machine is not a fax
machine. Check with the other party.
machine. Check with the other party.
L
The number you dialled is not in service.
PRESSED THE STOP KEY
L {
STOP} was pressed and fax communication
was cancelled.
OK
L
Fax communication was successful.
9.2 Error messages –
Display
Display
If the unit detects a problem, one or more of the
following messages will appear on the display.
—————————————————————
following messages will appear on the display.
—————————————————————
CALL SERVICE
CALL SERVICE 2
L
There is something wrong with the unit.
Contact our service personnel.
Contact our service personnel.
—————————————————————
CHECK DOCUMENT
L
The document was not fed into the unit
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 65) and try
again.
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 65) and try
again.
L
Attempted to transmit a document longer
than 600 mm. Press {STOP} to remove the
document. Divide the document into two or
more sheets and try again.
than 600 mm. Press {STOP} to remove the
document. Divide the document into two or
more sheets and try again.
—————————————————————
CHECK FILM
L
The ink film is empty. Replace the ink film
with a new one (page 14).
with a new one (page 14).
L
The ink film is not installed. Install it (page
12).
12).
L
The ink film is slack or creased. Tighten it
(see step 5 on page 13).
(see step 5 on page 13).
—————————————————————
CHECK MEMORY
L
The memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.
parameters, etc.) has been erased. Re-
program.
—————————————————————
CHECK PAPER
L
The recording paper is not installed or the
unit has run out of paper. Install paper and
press {START} to clear the message.
unit has run out of paper. Install paper and
press {START} to clear the message.
FP141-145AL.book Page 55 Tuesday, October 21, 2003 11:07 AM