Panasonic KX-FT934HK User Manual
5. Fax
20
5.4 Broadcast transmission
By storing phonebook items (page 13) or one-touch dial
(page 14) into the broadcast memory, you can send the
same document to multiple parties (up to 20). Your
programmed items will remain in the broadcast memory,
allowing frequent re-use.
(page 14) into the broadcast memory, you can send the
same document to multiple parties (up to 20). Your
programmed items will remain in the broadcast memory,
allowing frequent re-use.
L
Both phonebook items and one-touch dial can be
stored into the broadcast memory.
stored into the broadcast memory.
5.4.1 Programming items into the
broadcast memory
broadcast memory
1
Press {MENU} repeatedly to display “
BROADCAST”.
2
Press {SET}.
3
Program items.
Using stations 1–5:
Press the desired station key.
Press the desired station key.
Using stations 6–10:
Press {LOWER}, then press the desired station key.
Press {LOWER}, then press the desired station key.
Using phonebook:
Press {A} or {B} repeatedly to display the desired
item and press {SET}.
item and press {SET}.
L
To program other items, repeat this step (up to 20
items).
items).
L
If you program the wrong item, press {STOP} to
erase the item.
erase the item.
4
Press {SET}.
5
Press {STOP}.
Note:
L
Confirm the stored items by printing a broadcast
programming list (page 38).
programming list (page 38).
5.4.2 Adding a new item into the broadcast
memory
memory
After initial programming, you can add new items (up to
a combined total of 20).
a combined total of 20).
1
Press {>}.
2
Press {A} or {B} repeatedly to display
“
“
<BROADCAST>”.
3
Press {MENU}.
4
Press {*}.
5
Press {A} or {B} repeatedly to display the desired
item you want to add.
item you want to add.
6
Press {SET}.
L
To add other items, repeat steps 5 and 6 (up to
20 items).
20 items).
7
Press {STOP}.
5.4.3 Erasing a stored item from the
broadcast memory
broadcast memory
1
Press {>}.
2
Press {A} or {B} repeatedly to display
“
“
<BROADCAST>”.
3
Press {MENU}.
4
Press {#}.
5
Press {A} or {B} repeatedly to display the desired
item you want to erase.
item you want to erase.
L
To cancel erasing, press {STOP}.
6
Press {SET}.
7
Press {SET}.
L
To erase other items, repeat steps 5 to 7.
8
Press {STOP}.
5.4.4 Sending the same document to pre-
programmed parties
programmed parties
1
Insert the document FACE DOWN.
2
If necessary, press {A} or {B} repeatedly to select
the desired resolution (page 18).
the desired resolution (page 18).
3
Press {BROADCAST}.
L
The document will be fed into the unit and
scanned into memory. The unit will then send the
data to each party, calling each number
sequentially.
scanned into memory. The unit will then send the
data to each party, calling each number
sequentially.
L
After transmission, the stored document will be
erased from memory automatically, and the unit
will automatically print a report (Broadcast
sending report).
erased from memory automatically, and the unit
will automatically print a report (Broadcast
sending report).
Note:
L
If you select “
FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
send will decrease.
send will decrease.
L
If the document exceeds the memory capacity,
sending will be cancelled.
sending will be cancelled.
L
If a party is busy or does not answer, it will be skipped
and redialled later up to 5 times.
and redialled later up to 5 times.
To send the same document to a one-time group of
parties
You can also select a one-time group of parties to send
the same document to. After transmission, this group will
be deleted.
parties
You can also select a one-time group of parties to send
the same document to. After transmission, this group will
be deleted.
{
FAX/START}
{
LOWER}
Station keys
{A}{B}{>} {
MENU}
{
BROADCAST}
{
STOP}
{
SET}
FT932_934HK-PFQX2561YA-en.book Page 20 Monday, May 8, 2006 5:05 PM