Panasonic KX-FT908HK User Manual

A

Open the cover by pressing the cover open 
button (

1).

B

Install the recording paper.

C

Insert the leading edge of the paper into the 
opening above the thermal head (

1).

D

Pull the paper out of the unit.

L

Make sure that there is no slack in the 
paper roll.

E

Close the cover securely by pushing down on 
both sides.

F

For KX-FT902:
Press {FAX/START}, then tear off the 
excess paper by pulling it towards you.

For KX-FT904/KX-FT908:
Press {FAX/START} to cut the paper.

1

1

L

If the paper is secured with glue or tape, 
cut approximately 15 cm from the 
beginning of the roll before installing it.

L

When the power cord is connected, a 
message is printed each time the cover is 
opened then closed. If the recording paper 
is installed upside down, the message will 
not be printed. Install the paper correctly.

L

For accessory information, see page 4.

{

FAX/START}

FT-902-904-908HK.book  Page 6  Tuesday, June 15, 2004  5:44 PM