Panasonic KX-FT78HK User Manual

Page of 94
Frequently Asked Questions
-81-
Receiving mode
I cannot select the desired receiving 
mode.
L
If you want to set TAD/FAX (KX-FT78 
only), FAX ONLY or TEL/FAX mode, 
select the desired mode using feature 
#05 (page 70), and press 
{
RECEIVE MODE} repeatedly until the 
desired mode is displayed.
L
If you want to set TEL mode, press 
{
RECEIVE MODE} repeatedly until TEL 
mode is displayed.
The other party complains that they 
cannot send a document.
L
Press {RECEIVE MODE} repeatedly 
until TAD/FAX (KX-FT78 only), FAX 
ONLY or TEL/FAX mode is displayed.
Copying
The unit does not make a copy.
L
You cannot make a copy during 
programming. Make the copy after 
programming or stop programming.
A black line, a white line or a dirty 
pattern appears on the copied 
document.
L
The glass or rollers are dirty. Clean them 
(page 84).
The copied image is distorted.
L
The thermal head is dirty. Clean it (page 
86).
The copied document is blank.
L
The recording paper roll is not installed 
correctly. Make sure that the shiny side 
of the paper is facing down and re-install 
the paper (page 21).
Answering device (KX-FT78 
only)
I cannot retrieve recorded messages 
from a remote location.
L
Press the remote operation ID correctly 
and firmly (page 64).
The other party complains that they 
cannot leave a voice message.
L
The memory is full. Erase unnecessary 
messages (page 63).
If a power failure occurs 
L
The unit will not function.
L
The unit is not designed for making 
emergency telephone calls when the 
power fails. Alternative arrangements 
should be made for access to 
emergency services.
L
Fax transmission and reception will be 
interrupted.
L
If the delayed transmission (feature #25 
on page 72) is programmed and the start 
time is passed during a power failure, 
transmission will be attempted soon after 
power is restored.
FT74-78HK.book  Page 81  Friday, June 28, 2002  9:45 AM