Panasonic DP-180 User Manual

23

RESET Key
Resets all features to the initial
power-on state.

SET Key
Sets the parameter(s) of
Function settings.

FUNCTION Key
Use when changing the paper
size, initial function values
(default values) and key
operator settings.

ALARM LED (RED)
Lights/Flashes when trouble
occurs.

Lights:
Machine detected a trouble
status

● No paper in the selected

tray or toner has run out.

● Machine detected trouble,

such as paper misfed or
jammed.

Flashes:
Machine detected an alarm
status

● No paper in the Tray.

(Tray not selected)

● Toner is getting low, etc.

DARKER/LIGHTER
Keys
To adjust the Manual
Exposure.
(See pages 25 and 46)

SCAN/FILE Key
Used for network scanning.

N in 1 Key
Selects N in 1 copy mode.
(See page 29)

Keypad
Sets copy quantities or
inputs the parameter(s)
of Function settings.

CLEAR Key
Clears the copy count in the
display.

ACTIVE LED (GREEN)
Flashes when machine is
active.

Flashes:
When receiving printing data.

Lights:
While printing.

DUPLEX Key
Selects a 2-Sided copy.
(See page 27)

DOUBLE EXPOSURE Key
Selects Double Exposure
mode. (See page 30)

18

19

Keyboard
Inputs the Station, Machine name(s) of the
parameter settings, etc. (See pages 47-51)

20

21

22

23

24

25

26

29

30

31

When inputting a special character, press the "_/()..." Key and use the (     /     )
Cursor Keys to select a character.

When changing the stored character, move the cursor (   ) back to the character
and press the CLEAR Key then input a new character.

27

28

32

REMOTE COPY Key
Selects a Remote Copy. (See page 53)

NOTE: To adjust the brightness of the LCD display, press and while holding down the CLEAR

Key, keep pressing the ORIGINAL SIZE or COPY SIZE Key until the desired brightness
is achieved.
ORIGINAL SIZE : Dimmer
COPY SIZE

: Brighter