Panasonic DP-180 User Manual
37
Function
11
ORIG. SET BEEP ADF
Selects whether to enable the sound when
2:VALID
paper is placed on the ADF.
1:INVALID / 2:VALID
1:INVALID / 2:VALID
13
DEPT. COUNTER MODE
Monitors the copy usage of each department.
Consult your
1: TOTAL COUNTER
authorized
2: DEPT. COUNTER
service provider
3: DEPARTMENT LIST
16
LANGUAGE PRIORITY
Selects whether to enable the language selection 1:OFF
menu to display when the machine comes out of
the Energy Saver Mode, or when the RESET
button is pressed once.
1:OFF / 2:ON
menu to display when the machine comes out of
the Energy Saver Mode, or when the RESET
button is pressed once.
1:OFF / 2:ON
17
DATE & TIME
Sets the date and time.
Day, Month, Year, Time
Input the date and time using the Cursor Keys
and the Keypad.
Day, Month, Year, Time
Input the date and time using the Cursor Keys
and the Keypad.
18
DAYLIGHT TIME
Selects whether to enable the daylight time feature. 2:VALID
1:INVALID / 2:VALID
1:INVALID / 2:VALID
19
IP ADDRESS (DHCP)*
1,
*
2
Displays the address which was reserved by
DHCP server.
DHCP server.
20
SUBNET MASK (DHCP)*
1,
*
2
Displays the address which was reserved by
DHCP server.
DHCP server.
21
DEF. G/W IP (DHCP)*
1,
*
2
Displays the address which was reserved by
DHCP server.
DHCP server.
22
DHCP DEFAULT*
4
Selects whether to enable the DHCP.
2:VALID
1:INVALID / 2:VALID
23
DNS SERVER ADDR*
2
Selects whether to enable the DNS Server, and
2:VALID
sets its settings for Internet Fax/Email Function.
1:INVALID
2:VALID
<Sub Function>
1:INVALID
2:VALID
<Sub Function>
1:HOST NAME / 2:DOMAIN NAME /
3:PRI. DNS SERVER (IP ADDRESS1) /
4:SEC. DNS SERVER (IP ADDRESS2)
3:PRI. DNS SERVER (IP ADDRESS1) /
4:SEC. DNS SERVER (IP ADDRESS2)
24
MAC ADDRESS
Indicates the MAC address.
25
HARD DISK FORMAT*
3
Formats the hard disk.
26
HARD DISK ERR CHK*
3
Selects the provision for the hard disk error check.
27
ABBR GROUP ID
Inputs the group ID for the address book.
0
0-99
28
COMMUNITY NAME(1)*
2
Selects whether to change the Community
public
Name(1) SNMP.
Enables read only.
Enables read only.
29
COMMUNITY NAME(2)*
2
Selects whether to change the Community
public
Name(2) SNMP.
Enables read/write.
Enables read/write.
■ General Settings (For Key Operator) (Continued)
No.
Modes
Function
Initial
Setting
NOTE *
1
When setting other than DHCP server Network settings, Parameter No. “22 DHCP DEFAULT” should be set to “INVALID”
first, then setup Parameter No.19 to 21.
first, then setup Parameter No.19 to 21.
*
2
When Parameter No.19 to 23 (except 22) and No. 28, 29 are set, cycle the power by turning the Power Switch on the Left
Side of the machine OFF and ON.
Side of the machine OFF and ON.
*
3
Available only when the optional Hard Disk Drive Unit is installed.
*
4
When not connecting to LAN, setting of DHCP should be INVALID. When setting of DHCP at VALID and the
machine is in Shutdown Mode, there may fax reception would not be accepted.
machine is in Shutdown Mode, there may fax reception would not be accepted.