Panasonic DP-180 User Manual

Page of 65
44
Function
or
 Department Counter
The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers
for each department. (Maximum Number of Departments: 50)
Contact your authorized service provider to enable the Department Counter feature.
For Example
1: General Settings
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ^
13 DEPT. COUNTER MODE
KEY OPR. MODE (00-31)
ENTER NO.  OR ∨ ^
or
13 DEPT. COUNTER MODE
1: TOTAL COUNTER
 Network Settings
When the Parameter No. “22 DHCP DEFAULT” is set
to “INVALID”, the Key Operator must administer the
following Network settings manually.
Enter these required Network setting: "19 TCP/IP
ADDRESS”, “20 TCP/IP SUBNET MSK” and “21 TCP/
IP G/W ADDR.”, in the same manner as shown in the
following example.
19 TCP/IP ADDRESS
Input the TCP/IP Address
Ex.: 192.168.1.100
Use the “   ” key to enter a period.
1 → 9 → 2 →
→ 1 → 6 → 8 →
→ 1 →
 → 1 → 0 → 0
19 TCP/IP ADDRESS
192.168.1.100
Input Subnet Mask same
procedure as step 5.
DEPT. COUNTER
01:123145
For Department Counter
Clear the
counter to "0".
For ID (Identification) Code
ID CODE
01:12345678
ID Code
(1 to 8-digit)
MAX COPIES
01:12345678
For Maximum Copies
Maximum
number of
Copies (8-digit)
20 TCP/IP SUBNET MSK
If set in other
function mode
Same procedure as
steps 1 to 6 above.
1
7
11
8
2
3
1
6
5