Panasonic DP-180 User Manual
57
Problem Solving
Separation
Rubber
Rubber
Rollers
ADF Cover
Paper Transport Knob
Feed Rollers
Check
Action
Marked Copies
Clean the Platen Glass or Sheet.
(See below)
Is the machine’s Platen Glass or Platen Sheet
dirty?
dirty?
Cover the original with a sheet of white paper
before copying or lighten the exposure setting.
before copying or lighten the exposure setting.
Is the original a transparency film or a dark
original?
original?
■ If the measures outlined above do not solve the problem, call your Service Provider.
Machine Care
■ As a rule, clean weekly.
Platen Glass/Platen Sheet
Wipe marks off with a cloth moistened with a neutral
detergent. Avoid any liquid spilling/dripping into the
machine- risk of electric shock".
Wipe again with a dry cloth.
detergent. Avoid any liquid spilling/dripping into the
machine- risk of electric shock".
Wipe again with a dry cloth.
Platen
Sheet
Sheet
Platen (glass)
Clean the ADF Rollers or Separation Rubber.
(See below)
Are the machine’s ADF Rollers or Separation
Rubber dirty?
Rubber dirty?
■ When the copies are smudged.
Rollers/Separation Rubber
Open the ADF Cover.
Clean the Rollers and Separation Rubber with a
damp cloth moistened with water.
Close the ADF Cover.
Clean the Rollers and Separation Rubber with a
damp cloth moistened with water.
Close the ADF Cover.
3
Feed Rollers should be cleaned by
turning the Feed Rollers with the Paper
Transport Knob.
turning the Feed Rollers with the Paper
Transport Knob.
Clean the Corona Wire of the Drum Unit.
(See page 17)
(See page 17)
If a dark vertical line of
2-3cm in width is
printed.
2-3cm in width is
printed.